131 - 140 of 163
captive shaft linear stepper motor
Selling leads
|
... thrust, which can be directly used as an actuator to achieve the action required by customers. The basic angle of the stepping motor is 18 degrees...
2025-07-18 00:19:10
|
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2025-07-18 00:19:09
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-07-18 00:19:09
|
|
...stepper motor attached with 1812 worm gearbox This series of geared motors is assembled using SM15 stepper motor and 1812 precision metal worm gear ...
2025-07-18 00:19:09
|
|
...Stepper Motor NEMA34 1.8 Degree Step Angle With Lead Screw Description: This is a 86mm hybrid stepper motor with trapezoidal screw. Step angle is 1...
2025-07-18 00:19:09
|
|
...shaft 25mm diameter micro bipolar stepper motor with gearbox Description: This motor is a 25mm permanent magnet permanent magnet stepper motor with ...
2025-07-18 00:19:09
|
|
...n they have special use environments and requirements. In addition, we also have plastic sliders for customers to choose. Since the output shaft of ...
2025-07-18 00:19:09
|
|
VSM1070 5V DC 10mm diameter permanent magnet micro stepper motor with gear Description: This VSM1070 motor is 10mm with gear on shaft. Here is gear’s ...
2024-12-09 17:14:42
|
|
...gearbox for customers to choose. The coil resistance/cable length/cable color of this motor can also be customized. Regarding the worm gear, the ...
2024-12-09 17:14:42
|
|
... the worm gearbox, we have different gear ratio for you to choose. The bigger gear ratio is, output shaft rotates slower with bigger torque. About ...
2024-12-09 17:14:42
|