141 - 150 of 315
bipolar geared stepper motor
Selling leads
|
... of the lead screw, the lead screw will drive the slider to move back and forth. This makes it easy to provide actions such as forward and backward...
2025-07-27 00:16:39
|
|
...Stepper Motor Stroke 34mm Large Thrust 1.3KG 20mm stepper motor with brass slider and dual linear bearings: This is a 20mm stepper motor with brass ...
2025-07-27 00:16:39
|
|
... is turned clockwise or counterclockwise, the lead screw will advance or retreat. Through the relative motion of the inner rotor and the screw, the ...
2025-07-27 00:16:39
|
|
...stepper motor is a motor with a combination of both permanent magnet and variable reluctance characteristics. It is the most common type of stepper ...
2024-12-09 19:12:56
|
|
.... With Max. Response Frequency of 1000 Pps and no load, the Operating Temperature Range of the motor is -20~+70 ℃, while its Pull-Out Torque is 4.5 ...
2024-12-09 19:26:19
|
|
... 56mm height to 100mm height. The weight and torque of the motor are highly related to the height. The standard output shaft of the motor is the D...
2024-12-09 17:14:42
|
|
... to 100mm height. Motor’s weight and torque is related to its height. Motor’s standard output shaft is D shaft shaft, it can also be replaced with ...
2024-12-09 17:14:42
|
|
...stepper motor Description: For this 20BY45 motor, 20 means motor’s diameter is 20mm, and 45 means it take 4*5=20 steps to rotate one turn. This ...
2025-07-27 00:16:39
|
|
... the same time ,the lead will rotating. motor stepper step angle is 7.5 degree (also this can be 15 degree) lead pitch is 0.6096mm (there oprional ...
2024-12-09 17:14:42
|
|
... to rotate 1 turn. Its lead screw is 12.7mm, which means that when the motor rotates one revolution, the nut moves 12.7mm. Therefore, step length...
2025-07-27 00:16:39
|