21 - 30 of 104
5v permanent magnet stepper motor
Selling leads
|
...0.2, and the motor is 9 teeth. We can remove the move if customers do not need it. The torque of 6mm motor is about 1 g*cm range, if customers need ...
2026-04-16 00:33:42
|
|
SM1063 5V DC 18 degrees step angle PM stepper motor with lead screw and nut Description: SM1063 is 10mm diameter stepper motor with lead screw. Lead ...
2024-12-09 17:14:42
|
|
...the gear ratio of the motor. The gear ratio of this motor is 30:1. This motor is commonly used in medical equipment and electronic locks. Customers ...
2026-04-16 00:33:42
|
|
...permanent geared reducer magnet stepper motor Description: This is a 35mm permanent magnet motor with a gearbox. Motor’s output torque and speed is ...
2026-04-16 00:33:42
|
|
... to motor’s gear ratio. The gear ratio for this current model is 30:1. The motor is commonly used on medical equipment and electrical locks. You ...
2026-04-16 00:33:42
|
|
...permanent magnet motor This is our 36mm linear lead screw motor, with run-through shaft design. We have different starts for you to choose. We have ...
2026-04-16 00:33:42
|
|
... locks, etc. Mini body, 3N thrust, 56.5mm stroke, 0.067mm displacement per step, and can be completed in as little as 1 second. The input part of ...
2026-04-16 00:33:42
|
|
10mm Geared Stepper Motor 5V Horizontal Right Angle Motor 2 Phase Mini Gear Motor This is a 1024GB series geared motor, which is a special product ...
2026-04-16 00:33:42
|
|
SM15-816G 5V lead screw D shaft 18 degree step angle stepper motor with gearbox Description: This is a 15 motor attached with a 10*12mm gearbox. We ...
2024-12-09 17:14:42
|
|
...phase, and it’s designed for low driving voltage (around 5V DC). If customers want to drive the motor at higher voltage, we can adjust coil ...
2024-12-09 17:14:42
|