91 - 100 of 172
2phase micro geared stepper motor
Selling leads
|
... attached with a gearbox. This gearbox size is 12mm*10mm. (Length*Width) We have different gear ratios for choosing, from 2:1 to 1000:1. Customers ...
2024-12-09 17:14:42
|
|
... and gearbox. The height of stepper motor 42mm and we have multiple height for choosing. The gear ratio is 49:1, and gear ratio is adjustable based ...
2024-12-09 17:14:42
|
|
...motor and gearbox. The height of the stepper motor is 42mm, we have a variety of height sizes for you to choose. The gear ratio is 49:1, and the ...
2024-12-09 17:14:42
|
|
...gear ratios for choosing (from 2:1 to 1000:1), customers can choose gear ratio based on their speed/torque requirement. About connector type, on ...
2026-04-16 00:33:42
|
|
...geared reducer magnet stepper motor Description: This is a 35mm permanent magnet motor with a gearbox. Motor’s output torque and speed is related ...
2026-04-16 00:33:42
|
|
... to motor’s gear ratio. The gear ratio for this current model is 30:1. The motor is commonly used on medical equipment and electrical locks. You ...
2026-04-16 00:33:42
|
|
... and the lead screw supported by the lead screw rotate to generate thrust. The basic step angle of the motor is 18 degrees, and the motor runs 20 ...
2026-04-16 00:33:42
|
|
...gear ratio, and gear ratio is 32:1 This motor is a typical unipolar motor with 5 cables, and the red cable is common cable. This motor has cheap ...
2026-04-16 00:33:42
|
|
... motor equipped with a bracket, a lead screw and a relative motion slider. Special precision stepping motor with bracket and guide rail (when the ...
2026-04-16 00:33:41
|
|
... comes with a cylinder gearbox. Gearboxes are available in different gear ratios from 10:1 to 350:1 The larger the transmission ratio, the slower ...
2026-04-16 00:33:42
|