191 - 200 of 297
25mm pm stepper motor
Selling leads
|
... thrust, which can be directly used as an actuator to achieve the action required by customers. The basic angle of the stepping motor is 18 degrees...
2025-08-01 00:14:49
|
|
... is about 39 mm. 0.02mm per step Resistance 10 Ohms Recommended driving voltage 3.3V-5V DC The pull-out thrust of this motor is about 120g Min ...
2025-08-01 00:14:48
|
|
... ratio combinations for you to choose. The output shaft is a round shaft with a slot. Motor’s output torque is related to motor’s length and gear ...
2025-08-01 00:14:49
|
|
...Stepper Motor NEMA34 1.8 Degree Step Angle With Lead Screw Description: This is a 86mm hybrid stepper motor with trapezoidal screw. Step angle is 1...
2025-08-01 00:14:48
|
|
... and the range is generally between 20~51mm. It can be re-evaluated after special request. Hybrid stepping motor has the advantages of high control ...
2025-08-01 00:14:48
|
|
...stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes 200 steps to rotate one turn. The ...
2025-08-01 00:14:48
|
|
...stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it ...
2025-08-01 00:14:49
|
|
...Stepper Motor with Planetary Gearbox Description: This is a NEMA 17 hybrid stepper motor with planetary gearbox. It is available in different gear ...
2025-08-01 00:14:49
|
|
...stepper motor with planetary gearbox This is a series of products assembled with a 35mm (NEMA14) square hybrid stepper motor and a cylinder type ...
2025-08-01 00:14:49
|
|
...stepper motor with 4 pins FPC Description: This VSM10152 motor is 10mm diameter linear stepper motor with lead screw + slider. Step angle is ...
2025-08-01 00:14:48
|