161 - 170 of 299
25mm mini stepper motor
Selling leads
|
..., high in precision, easy to design and install, and widely used in automation equipment. There is a manual nut (brass nut) at the bottom of the ...
2026-04-16 00:33:42
|
|
...revolution. The height of the motor is 34mm, we also have 40mm and 48mm height for customers to choose. The higher the height of the motor, the ...
2026-04-16 00:33:42
|
|
...stepper motor with planetary reducer Description: This is NEMA 17 hybrid stepper motor with a planetary gearbox. There are different gear ratios ...
2026-04-16 00:33:42
|
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2026-04-16 00:33:42
|
|
...stepper motor attached with 1812 worm gearbox This series of geared motors is assembled using SM15 stepper motor and 1812 precision metal worm gear ...
2026-04-16 00:33:42
|
|
...stepper motor with gearbox Description: This is a 20mm stepper motor fitted with a gearbox. The stepping angle of a single 20mm motor is 18°/step. ...
2026-04-16 00:33:42
|
|
...stepper motor Description: Model No. 35BYJ46 motor is our standard unipolar 4 phase stepper motor with gearbox on top. The red cable is common line ...
2026-04-16 00:33:42
|
|
.... The step angle of a single motor is 3.75°/step. It has a top gear ratio of 42.5, so the step angle is 3.75°/42.5. This motor is suitable for 12V ...
2026-04-16 00:33:42
|
|
...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0...
2024-12-09 17:14:42
|
|
... on top. The red cable is common line in the middle. This motor has cheap price and high reliability, the motor is very commonly used on air ...
2026-04-16 00:33:42
|