China Micro Stepper Motor manufacturer
Changzhou Vic-Tech Motor Technology Co., Ltd.
Focus on quality, customer first, continuous improvement, continuous struggle
4
Home > Products >

24v micro stepper motor

Browse Categories

Changzhou Vic-Tech Motor Technology Co., Ltd.

City: changzhou

Province/State:jiangsu

Country/Region:china

Tel:+8617715451401-519-86921569-8:30

Contact Person:
Mr.Aleen
View Contact Details
71 - 80 of 304

24v micro stepper motor

Selling leads
... stepper motor features: SM15-45L is a precision micro step motor, the output shaft with a pitch of 0.5mm of the screw, through the screw and the ... 2025-07-23 00:16:38
... is turned clockwise or counterclockwise, the lead screw will advance or retreat. Through the relative motion of the inner rotor and the screw, the ... 2025-07-23 00:16:37
...Stepper Motor is a high torque stepper motor that is widely used in various applications. It is a PM stepper motor with a 35mm motor diameter and a ... 2025-07-23 00:16:38
.... With Max. Response Frequency of 1000 Pps and no load, the Operating Temperature Range of the motor is -20~+70 ℃, while its Pull-Out Torque is 4.5 ... 2024-12-09 19:26:19
..., the guide rails move), the moving speed can be controlled by the pulse frequency, and the moving distance can be controlled by the number of ... 2025-07-23 00:16:37
bipolar drive 20mm NEMA8 micro slider stepper motor lead screw 66mm stroke linear motors features: SM20-66L is a precision micro stepping motor, the ... 2025-07-23 00:16:38
...Stepper Motor is a kind of stepper motor with slider. It adopts bipolar drive mode and has a wide operating temperature range from -10°C to +60°C. ... 2024-12-09 19:30:15
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ... 2025-07-23 00:16:38
...0.3mm. Passing through the screws, the screw rod supports the turning of the screw to the thrust. The basic step of the motor is 9 degrees, and the ... 2025-07-23 00:16:37
... are many choices according to the thickness of the motor, step angle, assembly method, etc., and can also be customized according to customer ... 2024-12-09 17:14:42
Page 8 of 31 :   |< << 4 5 6 7 8 9 10 11 12 >> >|