61 - 70 of 82
20mm nema 8 stepper motor
Selling leads
|
... support to the slider, and make sure slider can move fluently when the load goes up. Lead screw is regular M3 screw, pitch is 0.5mm, and the motor ...
2025-07-26 00:14:22
|
|
...20mm 18 degrees M3 lead screw linear stepper motor with brass slider This is a 20 mm stepper motor with a brass slider, and double linear bearings. ...
2025-07-26 00:14:22
|
|
...20mm Hybrid Stepper Motor Hybrid Stepper Motors are widely used in 3D Printers, and the 20mm hybrid stepper motor is a perfect solution for users ...
2024-12-09 19:11:15
|
|
... equipped with a bracket, a lead screw, and a relative motion slider. Because the output shaft of the motor is a screw, during the rotation of the ...
2025-07-26 00:14:22
|
|
NEMA17 42mm hybrid stepper motor NEMA17 3D printer stepper motor is a hybrid stepping motor with a square size of 42*34. The length may be adjusted ...
2025-07-26 00:14:22
|
|
...Description: Hybrid Stepper Motor is a type of ball screw stepper motor which is a combination of a traditional motor and a ball screw. It is ...
2024-12-09 19:11:15
|
|
...phase, and it’s designed for low driving voltage (around 5V DC). If customers want to drive the motor at higher voltage, we can adjust coil ...
2024-12-09 17:14:42
|
|
... 6.3. The temperature rise is 80K Max. and the dielectric strength is 1mA Max. @ 500V, 1KHz, 1Sec. The hybrid stepper motor has excellent ...
2024-12-09 19:10:59
|
|
... are many choices according to the thickness of the motor, step angle, assembly method, etc., and can also be customized according to customer ...
2024-12-09 17:14:42
|
|
42mm(NEMA17) geared stepper motor with planetary gearbox This is a 42mm square hybrid stepper motor (NEMA 17) mount with a planetary gearbox. There ...
2025-07-26 00:14:22
|