China Micro Stepper Motor manufacturer
Changzhou Vic-Tech Motor Technology Co., Ltd.
Focus on quality, customer first, continuous improvement, continuous struggle
4
Home > Products >

18 step angle stepper motor

Browse Categories

Changzhou Vic-Tech Motor Technology Co., Ltd.

City: changzhou

Province/State:jiangsu

Country/Region:china

Tel:+8617715451401-519-86921569-8:30

Contact Person:
Mr.Aleen
View Contact Details
91 - 100 of 219

18 step angle stepper motor

Selling leads
...Stepper Motor 7.5 Degrees For Coffee Machine Etc SM35-048L 35mm PM stepper motor SM35-048L-372 is a micro stepping motor with an outer diameter of ... 2024-12-09 17:14:42
...Stepper Motor 15mm High Torque Gearbox Stepper Motor Gear Reduction 1:50 Mini 2 Phase Stepper Motor This motor is a 15mm diameter gear reduction ... 2025-07-19 00:22:13
... the deceleration effect of the gear box, the final angular resolution of the motor can reach 0.018~0.9 degrees, which can be used for various ... 2024-12-09 17:14:42
...-sized stepper motors with a step angle of 18°/gear Ratio. The model number is SM08-GB10 and the gearbox type is GB10 (8*10). The resistance is 40Ω... 2024-12-09 18:46:25
.... With Max. Response Frequency of 1000 Pps and no load, the Operating Temperature Range of the motor is -20~+70 ℃, while its Pull-Out Torque is 4.5 ... 2024-12-09 19:26:19
.... With the deceleration effect of the gearbox, the final angular resolution of the motor can reach 0.018~0.9 degrees, which can be used in various ... 2024-12-09 17:14:42
...Stepper Motor is a type of permanent magnet linear motor that operates in a miniature form. It has a Model No. of SM20-21L-T, and a step angle of ... 2024-12-09 19:26:19
...stepper motor SM35-048-372 is a micro stepping motor with an outer diameter of 35mm. This model is only a typical product. There are many choices ... 2025-07-19 00:22:13
...Stepper Motor With D Shaft/Lead Screw Shaft & Molex 51021-0400 (1.25mm Pitch) Product Description: Geared Stepper Motor is a high torque stepper ... 2025-07-19 00:22:13
..., gearbox stepper motor boasts a pull in torque of 3.5 Gf-cm Min. (at 500 Pps , 5.0v Dc), an efficiency of 10~20%, and a step angle of 18 degrees. ... 2025-07-19 00:22:13
Page 10 of 22 :   |< << 6 7 8 9 10 11 12 13 14 >> >|