161 - 170 of 209
18 degree geared stepper motor
Selling leads
|
..., 0.8mm shaft diameter, the shaft length can be according to the demand change appropriately, can also be equipped with gear, pulley, worm, screw, ...
2026-04-16 00:33:42
|
|
...0.3mm. Passing through the screws, the screw rod supports the turning of the screw to the thrust. The basic step of the motor is 9 degrees, and the ...
2026-04-16 00:33:41
|
|
...Stepper Motor 7.5 Degrees For Coffee Machine Etc SM35-048L 35mm PM stepper motor SM35-048L-372 is a micro stepping motor with an outer diameter of ...
2024-12-09 17:14:42
|
|
...18° angle stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small ...
2026-04-16 00:33:42
|
|
...Stepper Motor 4 Bare Pins D Shaft 5V DC 18° Angle 4 Pins Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of ...
2026-04-16 00:33:42
|
|
...18° angle stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small ...
2026-04-16 00:33:42
|
|
42mm 2.2KG*cm torque NEMA 17 hybrid stepper motor with round shaft Description: This is 42mm NEMA17 hybrid stepper motor. Step angel is 1.8° It takes ...
2026-04-16 00:33:42
|
|
12V 5 Wire High precision 7.5 degree 30BYJ46 Permanent Magnet Stepper Motor Hole spacing of cover plate (mm): customizable Reduction ratio: 1 / 85.25 ...
2026-04-16 00:33:42
|
|
Small size M1.7 lead screw permanent magnet 8mm 18° step angle linear stepper motor Description: This is our VSM08284 8mm permanent magnet motor with ...
2024-12-09 17:14:42
|
|
...stepper motor with manual nut Description: This is a 20mm diameter hybrid stepper motor with a run-through lead screw shaft. There is a manual nut ...
2026-04-16 00:33:42
|