71 - 80 of 150
15mm trapezoidal screw stepper motor
Selling leads
|
... motor is small, the selection range of the reduction ratio is wide, and the angle between the output shaft and the motor bearing is 90 degrees, ...
2025-07-16 00:18:33
|
|
... equipped with a bracket, a lead screw, and a relative motion slider. Because the output shaft of the motor is a screw, during the rotation of the ...
2025-07-16 00:18:33
|
|
...15mm PM stepper motor with protective case Description: This is our 15mm motor attached with a gearbox. This gearbox size is 12mm*10mm. (Length...
2024-12-09 17:14:42
|
|
Product Description: Hybrid Stepper Motor is a type of ball screw stepper motor which is a combination of a traditional motor and a ball screw. It is ...
2024-12-09 19:11:15
|
|
... the same time ,the lead will rotating. motor stepper step angle is 7.5 degree (also this can be 15 degree) lead pitch is 0.6096mm (there oprional ...
2024-12-09 17:14:42
|
|
...0.3mm. Passing through the screws, the screw rod supports the turning of the screw to the thrust. The basic step of the motor is 9 degrees, and the ...
2025-07-16 00:18:33
|
|
....3) The lead screw is specifically design for this product. (Non-standard lead screw) The travel distance is about 9mm and you can not change its ...
2024-12-09 17:14:42
|
|
... resolution can reach 0.02mm, achieving the purpose of precise control. In terms of actuators, the subdivision drive method is used to meet the ...
2025-07-16 00:18:33
|
|
...stepper motor Description: This is 8mm diameter PM stepper motor with lead screw on top. Lead screw type is M1.7*P0.3 M1.7*P0.3 is very uncommonly ...
2025-07-16 00:18:33
|
|
...screw POM slider linear stepper motor with 4 pins FPC Description: This VSM10152 motor is 10mm diameter linear stepper motor with lead screw + ...
2025-07-16 00:18:33
|