81 - 90 of 358
cold runner multi cavity injection mold
Selling leads
|
...mold was developed (designed and manufactured) by Chitwing with two slides, cold runner and short cycle time; the molded part has stable high ...
2026-06-18 00:29:33
|
|
... exceptional craftsmanship. The surfaces are treated with MT11010 etching, while the cavity and core are hardened using 1*2/S136 steel, ensuring ...
2026-06-18 00:29:33
|
|
... side, both affixed to separate mold plates. In this mold, the cold runner system allows the material to solidify between cycles, which can lead to ...
2026-06-18 00:29:33
|
|
...mold base P/N: FCI3350.7011090 Length 400 Net weight Type Three-plates mold Width 500 Injection/runner type Cold runner Height 376 454kg LKM ...
2026-06-18 00:29:33
|
|
...smooth surface polished to A1 Injection/runner type Cold runner Type Three-plates mold Standard LKM Steel of cavity and core Harden (1*1/S136) Part ...
2026-06-18 00:29:33
|
|
...Mold base P/N FCI3035 609080 Mold size Length*Width Height 350*350 331 Standard: LKM Type: Three-plates mold Gate: Pin point gate √ Standard: LKM √ ...
2026-06-18 00:29:33
|
|
...mold has a reasonable structure to ensure uniform pressure and minimized stress concentration. The tool life is up to 5-10 years (50 K shots). It ...
2026-06-18 00:29:33
|
|
... is polished. The cavity and core are hardened to have good physical strength and anti-wearing performance. It adopts three-plates mold structure ...
2026-06-18 00:29:33
|
|
...Mold weight - 392kg ☆ IMM Tonnage - 180T ☆ Gate - Side gate ☆ Part material - PC ☆ Part size - 21.41 X 50.40 X 25.18mm ☆ Part net weight - 1.6g ☆ ...
2026-06-18 00:29:33
|
|
...Mold base:Standard CI2025.507070. 2. Standard:LKM 3. Type:Two-plates mold 4. Tool life:500K shots ⒌IMM tonnage:100T 6. Mold size:(L)250 X (W)250 X ...
2026-06-18 00:29:33
|