351 - 358 of 358
cold runner multi cavity injection mold
Selling leads
|
...Mold size Slide Lifter Cold runner LKM L: 760mm W: 660mm H: 750mm 4 4 Steel of cavity and core Harden with S136 Surface finish Polish to 800# ...
2024-12-09 21:52:05
|
|
Transparent lower bracket (1*4) No.24318 Mold standard / type Mold size (mm) Net weight Slide LKM / three-plates mold L*W H 308.86kg 1 350*400 356 Fit ...
2024-12-09 21:52:05
|
|
Bottom cover bracket (1*2) No.24677 Mold steel Mold size (mm) Mold net weight Lifter Surface finish Cavity Core L*W H Harden with S136 350*450 374.4 ...
2026-06-18 00:29:33
|
|
Transparent bottom cover bracket (1*2) No.24677. Standard LKM Surface finish Type Three-plates mold (self-degating) VDI21# Mold size 350X 450X 374.4mm ...
2024-12-09 21:52:05
|
|
Transparent top cover bracket (1*2) No.24669 Mold size (mm) Standard: LKM L 320 W 400 H 335.97 Mold weight 264.62kg Lifter 3 This is a three-plates ...
2024-12-09 21:52:05
|
|
... shots, this mold is meticulously crafted with a surface polished to 600# sandpaper. It employs a cold runner system and is constructed on an LKM ...
2026-06-18 00:29:33
|
|
... (Electrical Discharge Machining) using VDI27# (Makino) and LKM standard. With dimensions of 400mm in length, 450mm in width, and 429mm in height, ...
2026-06-18 00:29:33
|
|
POA Transparent Rear Pad (1*1) No.22729-C The mold section is produced with an LKM mold base and is structured with a cold runner system. It is etched ...
2026-06-18 00:29:33
|