611 - 620 of 693
sop8 high output transceivers
Selling leads
...Supply Voltages, 0.9 V to 3.6 V on A Port and 0.9 V to 3.6 V VCC Isolation Feature – If Either VCC Input is at GND, all Outputs are in High...
2024-12-09 22:37:47
|
... Voltage Translation With No Direction Pin High-Impedance Output SCL_A, SDA_A, SCL_B, SDA_BPinsWhenOE=LoworVCC =0V Internal 10-kΩ Pullup Resistor ...
2024-12-09 22:37:47
|
... 1.2Vto3.6VonAPortand1.65Vto5.5Von B Port (VCCA ≤ VCCB) VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High...
2024-12-09 22:37:47
|
... Required Integrated Negative Charge Pump Intelligent Muting System; Soft Up or Down Ramp and Analog Mute for 120dB Mute SNR Integrated High...
2024-12-09 22:37:47
|
... for 2 kΩ and 600Ω Loads Wide Operating Range: Ultra Low Input Current: Rail-to-Rail Output Swing 2.0V to 15.5V 20fA – @ 600Ω: 200mV from Either ...
2024-12-09 22:37:47
|
...-kΩ Load) Assured 3-V, 5-V and 15-V Performance Excellent CMRR and PSRR: 82 dB Ultra Low Input Current: 20 fA High Voltage Gain (RL = 500 kΩ): 130 ...
2024-12-09 22:37:47
|
... V) Longer Cables by allowing bus capacitance of 400 pF on Main Side (Sx/Sy) and 4000 pF on Transmission Side (Tx/Ty) Outputs on the Transmission ...
2024-12-09 22:37:47
|
... (2.7 V to 5.5 V) I2C-Compatible 2-Wire Interface Which Supports Standard (100-kHz), Fast (400-kHz), and High- Speed (3.4-MHz) Modes Rail-to-Rail ...
2024-12-09 22:37:47
|
... Hall Effect / Magnetic Sensors 2.5-38V Dig Latch Hall Sensor 1 Features Linear Output Hall Sensor • Superior Temperature Stability – Sensitivity ...
2024-12-09 22:37:47
|
... voltage – Up to 5000 VRMS isolation rating – Up to 10 kVPK surge capability – ±100 kV/μs minimum CMTI Integrated high-efficiency DC-DC converter ...
2024-12-09 22:37:47
|