custom Blackmer Split Mechanical Seal Water Pump 35mm

Browse Categories

Water Pump Mechanical Seal(279)
Grundfos Pump Mechanical Seal(29)
Flygt Mechanical Seal(31)
Ebara Mechanical Seal(7)
Lowara Mechanical Seal(5)
APV Pump Mechanical Seal(10)
Wilo Pump Mechanical Seal(4)
CNP Mechanical Seal(26)
Medium Mechanical Seal(17)
Rotor Pump Mechanical Seal(10)
AFL Mechanical Seal(7)
Printing Dyeing Equipment Mechanical Seal(2)

YUEMI

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86-13538971934

Contact Person:
Mr.ZENG View Contact Details

custom Blackmer Split Mechanical Seal Water Pump 35mm

Brand Name	YUE MI
Model Number	Blackmer-35mm
Certification	ISO SGS
Place of Origin	Guangzhou, China
Minimum Order Quantity	5/PCS
Price	US $ 166.8-186.8/PCS
Payment Terms	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability	10000/Set/Month
Delivery Time	2 word days
Packaging Details	Details Carton
Traemark	YUEMI
Pump	cosmetic emulsifying pot and stirring pot
Function	Pump
Usage	UNbalanced
Shaft diameter	Blackmer-35mm
Secondary Sealing	CA SIC
Standard Or Nonstandard	standard
Keywords	pump seal
Type	Single Spring
Style	Mechanical Seal

Detailed Product Description

Custom Blackmer Split Mechanical Seal Water Pump 35mm

Stock seals ready for fast delivery

Provides excellent quality with competitive price

Technical Parameters

Parameter	Specification
Temperature	-30℃ to +200℃
Pressure	≤1.2 MPa
Speed	≤12 m/s

Materials

Component	Material
Rotary Ring	SIC, CAR, CE, TC
Stationary Ring	SIC, CAR, CE, TC
Spring	SUS304/SUS316
Stationary Seat	SUS304/SUS316
Secondary Seal	FKM/EPDM
Rotary Ring Holder	SUS304/SUS316

Preparation Requirements

Shaft outside diameter tolerance: ±0.05mm
Shaft run out: <0.1mm
Shaft end float: <0.13mm
No sharp edges on the shaft over the O-ring

Important Note

During installation, do not scratch or damage the O-ring. If any component is damaged, please contact us for replacement.

Installation Instructions

The complete cartridge seal is cleaned and thoroughly leak-tested before sale. To avoid damage, do not disassemble and clean parts again before installation.

Installation Steps:

The fitting allowance between seal and shaft is dl h6 0.8, with a leading edge at the shaft end
The shaft outside diameter at screw position should be 0.1-0.2mm smaller to prevent over-tightening
Lubricate the shaft with oil before installation
Place the cartridge seal into the pump chamber, then:

Tighten four screw bolts of flanges, ensuring the medium leading hole "G" is at the top position
Tighten four set screws to position the shaft sleeve on the shaft
Remove four gauge plates (keep for future installation and disassembly)
Connect the medium lead-in pipe with hole "G" to flush away friction heat and seal chamber during pump operation

Post-Installation Check:

After completing installation, turn the shaft by hand to check rotation. If the shaft does not rotate smoothly, the seal has been improperly installed.

We sincerely cooperate with clients to supply high quality products and service. We believe establishing long-term cooperative relationships is key to success.


From:	Enter your Email please. Your email is incorrect!
To:	YUEMI
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

custom Blackmer Split Mechanical Seal Water Pump 35mm

custom Blackmer Split Mechanical Seal Water Pump 35mm

TLS Durrex Rotor Pump Mechanical Seal / Sanitary Pump / Syrup Pump With Water Cooling

TLS Durrex Rotor Pump Mechanical Seal / Sanitary Pump / Syrup Pump / Without Water Cooling

Syrup Rotor Pump Mechanical Seal 106-20mm 25mm 30mm 35mm 40mm

Blackmer Industrial Mechanical Seal 45mm For Water Pump

custom Blackmer Split Mechanical Seal Water Pump 35mm

Zhejiang Liou Rotor Pump Mechanical Seal 155-17mm Balanced And Unbalanced