China Water Pump Mechanical Seal manufacturer
YUEMI
Guangzhou Yuemi Mechanical Seals Co., Ltd
3
Home > Products > Ebara Mechanical Seal >

Balanced Pump EBARA Mechanical Seall 16mm 20mm Stainless Steel

Balanced Pump EBARA Mechanical Seall 16mm 20mm Stainless Steel

Brand Name YUE MI
Model Number Ebara-16mm
Certification ISO SGS
Place of Origin Guangzhou, China
Minimum Order Quantity 1/PCS
Price US $ 58.8-63.8/PCS
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 10000/Set/Month
Delivery Time 2 word days
Packaging Details Details Carton
Traemark YUEMI
Function Ebara Pump
Support Non-Standard Customization
Shaft diameter Ebara-16mm
Performance Wear and Corrosion
Style Single Spring
Detailed Product Description
Product Overview
EBARA 25mm mechanical seal designed for EVMS and EVMSG series pumps. Constructed with premium materials for reliable performance in demanding industrial applications.
Compatible Pump Models
Mechanical seals available for multiple EBARA pump series including:
  • JES - JE, JESX - JEX/AGA - AGC/CD, CDX, 2CDX/DWO, DWC/CM(A-B-C-D) - CMR, CDA
  • PRA - PRN/SWS - SWT/COMPACT/MATRIX/CVM/MULTIGO/HVM/EVMG, EVM, EVML/
  • 3M SERIES, 3S SERIES, 3P SERIES, 3PF SERIES/3LM SERIES, 3LS SERIES, 3LP SERIES, 3LPF SERIES
  • 3D SERIES, 3DS SERIES, 3DP SERIES/MD, SB3, WINNER 4N, 4BHS, IDROGO
  • SF6, 6BHE(L), 8BHE(L)/OPTIMA, BEST ONE - BEST ONE VOX/BEST 2-5, RIGHT/DW - DW VOX
  • DS-DSF, DVS, DML-DMLV, DMLF-DMLVF, DL (W/C), DRD, EBAMIX, DRS/DUMPER (L)
  • D TANK, BEST BOX, SANIRELEV 11&22/Ego, Ego T, Ego ER, Ego B/MR B/MR S/LPS/ELINE, ELINED, LPC, LPCD
Technical Specifications
Operating Parameters
ParameterSpecification
Temperature Range-30℃ to +180℃
Maximum Pressure≤ 2 MPa
Maximum Speed≤ 12 m/s
Compatible MediaChemical raw materials
Material Composition
ComponentMaterial
Rotary RingSIC CAR CE TC
Stationary RingSIC CAR CE TC
SpringSUS304 / SUS316
Stationary SeatSUS304 / SUS316
Secondary SealFKM / EPDM
Rotary Ring HolderSUS304 / SUS316
Installation Guidelines
Preparation Requirements
  • Shaft outside diameter tolerance: ±0.05mm
  • Shaft run out: < 0.1mm
  • Shaft end float: < 0.13mm
  • No sharp edges on the shaft over the O-ring
Important Note: During installation, avoid scratching or damaging the O-ring. If any component is damaged, contact us immediately for replacement.
Installation Procedure
Cartridge seals are thoroughly cleaned and leak-tested before sale. Do not disassemble or clean components before installation to prevent damage.
Step 1: Ensure shaft fitting allowance is dl h6 0.8. The shaft end should have a leading edge. Lubricate the shaft with oil.
Step 2: Place cartridge seal into pump chamber, then:
  • Tighten four screw bolts of flanges, ensuring medium leading in hole "G" is at the top position
  • Tighten four set screws to position the shaft sleeve on the shaft
  • Remove four gauge plates (retain for future installation and disassembly)
  • Connect medium lead-in pipe with hole "G" to flush away friction heat and seal chamber during pump operation
Final Check: After installation, manually rotate the shaft to verify smooth rotation. If rotation is not smooth, the seal may have been improperly installed.
We are committed to establishing long-term cooperative relationships with our clients by supplying high-quality products and exceptional service.
Product Tags: 20mm Ebara Mechanical Seal   16mm Ebara Mechanical Seal   Balanced ebara pump mechanical seal  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: YUEMI
Subject:
Message:
Characters Remaining: (80/3000)