Cement Lime Vertical Shaft Kiln Active Lime Kiln Production Line
Product introduction:
The lime shaft kiln is used to calcine limestone and is the most
important equipment in the lime production line.
Due to its advantages of low energy consumption, small footprint,
low investment, and wide fuel applicability, it is widely used in
metallurgy, building materials, calcium carbide, nano calcium
carbonate, aerated concrete and other industries.mainly composed of
cyclone tube, air pipe, discharge pipe, decomposing furnace, lock
air valve, spreader plate, inner tube hanging sheet, decomposing
furnace and feeding room.The main function of the shaft kiln is to make full use of the
thermal enthalpy of the raw materials in the discharged hot air
flow, preheat and decompose part of the carbonate, and then enter
the shaft kiln to continue heating and decomposing to complete the
calcination of the clinker.
Vertical kiln customer site:
Specification:
Specificttions
(mm) | Kiln demensions size | Capacity(t/h) | Motor power(kw) | Kiln Weight |
Diameter
(mm) | Length
(mm) | Obliquity
(%) | (t) |
TV-100 | 1.4 | 33 | 3 | 0.9-1.5 | 18.5 | 42.7 |
TV-150 | 1.6 | 36 | 4 | 1.2-1.9 | 22 | 56.6 |
TV-200 | 1.8 | 45 | 4 | 1.9-2.4 | 30 | 78.2 |
TV-250 | 1.9 | 39 | 4 | 1.65-3.5 | 30 | 85 |
TV-300 | 2 | 40 | 3 | 2.5-4 | 37 | 120 |
TV-350 | 2.2 | 45 | 3.5 | 3.4-5.4 | 45 | 128.3 |
TV-400 | 2.5 | 40 | 3.5 | 9.0-10.5 | 55 | 156 |
TV-450 | 2.5 | 50 | 3 | 6.25-7.6 | 55 | 187.37 |
TV-500 | 2.5 | 54 | 3.5 | 6.9-8.5 | 55 | 196.29 |
TV-550 | 2.7 | 42 | 3.5 | 10.0-13.6 | 55 | 198.5 |
TV-600 | 2.8 | 44 | 3.5 | 12.5-13.5 | 55 | 201.58 |
TV-650 | 3 | 45 | 3.5 | 12.8-16 | 75 | 210.94 |
TV-750 | 3 | 48 | 3.5 | 25.6-30 | 100 | 237 |
TV-800 | 3 | 60 | 3.5 | 12.3-15 | 100 | 310 |
TV-900 | 3.2 | 50 | 4 | 40.5-42 | 125 | 370 |
