Vertical Shaft Lime Kiln Hydrated Lime Kiln Vertical Shaft Furnace
Product introduction:
Vertical lime kiln is widely used in cement production in the
construction industry. Lime is also very important in many other
uses and chemical applications, used in the production of gypsum
wallboard or drywall, for air pollution control scrubbing systems,
used in agriculture to neutralize the acidity of soil, and lime is
used as a pigment in paint. Adopting the most advanced lime kiln
technology in China, it has low initial investment, low operating
cost, low environmental pollution impact, low fuel consumption, and
is fully automated through PLC and intelligent fault alarm system.
Qualified limestone is stored in silos and is lifted and
transported into the silo at the top of the preheater.
Technical features:
1. High degree of automation. The operation adjustment, control and
alarm of each device in the calcining system are centrally
controlled by the PLC in the main control room, and the screen
displays each control point and the necessary interlocking device
to monitor the production process, automatically record each
operating parameter, and print it at any time.
2. Improve environmental protection measures. The calcining tail
gas adopts pulse jet bag dust collector to remove dust, which meets
the national emission standards. Bag dust collector is also used
for dust removal in the vertical drop point cooler.
Specification:
Items (mm) | Obliquity (%) | Rotation speed (r/min) | Inlet air temperature (°C) | Power (kw) | Capacity(t/h) | Weight (t) |
600x6000 | 3-5 | 3-8 | <=700 | 3 | 0.5-1.5 | 3 |
800x8000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.0 | 3.5 |
800x10000 | 3-5 | 3-8 | <=700 | 4 | 0.8-2.5 | 4.5 |
1000x10000 | 3-5 | 3-8 | <=700 | 5.5 | 1.0-3.5 | 5.6 |
1200x10000 | 3-5 | 3-8 | <=700 | 7.5 | 2-3 | 14.5 |
1200x12000 | 3-5 | 3-8 | <=700 | 11 | 2-5 | 14.8 |
1500x12000 | 3-5 | 2-6 | <=800 | 13 | 3.5-8 | 17.8 |
1800x12000 | 3-5 | 2-6 | <=800 | 18 | 5-12 | 25 |
2200x12000 | 3-5 | 1.5-6 | <=800 | 21 | 6-10 | 33 |
2200x18000 | 3-5 | 1.5-6 | <=800 | 22 | 10-18 | 52 |
2200x20000 | 3-5 | 1.5-6 | <=800 | 30 | 12-20 | 56 |
2400x20000 | 3-5 | 1.5-5 | <=800 | 37 | 18-30 | 60 |
3000x20000 | 3-5 | 1.5-5 | <=800 | 55 | 25-35 | 75 |
