101 - 110 of 153
water based pu mold release agent
Selling leads
|
... can be diluted. Properties: Appearance: White liquid Shelf life: 12 months Density: 0,97-1,03 g/cm³ Advantages: Water based, no VOC Easy to apply ...
2025-07-12 00:34:35
|
|
...Water Based Mold Release Agent for Flexible Foam Car Parts Properties: State: liquid Density: 0.97-1.03 g/cm³ Shelf life: 12 months Application ...
2025-06-26 16:20:15
|
|
...Mold Release Agent for Car Roof Advantages: Easy to use Stronge demoulding ability Excellent surface Application: Molds should be clean before ...
2025-06-26 16:20:19
|
|
...mold release agent that will provide a very good, even and non-glossy appearance. It is now successfully used in Asia market. For the EVA boots...
2025-07-12 00:34:35
|
|
... Application: The mold should be thoroughly cleaned. Mold cleaning and release agent application should be performed in a well ventilated area. ...
2025-07-12 00:34:35
|
|
...Water Based Mold Release Agent for Conveyor Belt Mold Protecting Lubekote release agent for belt are with high quanity. Both waterbased and solvent ...
2025-07-12 00:34:35
|
|
... up on the molds No rust on mold Excellent performance of produced parts Excellent release properties Federal Shoe Release Agent Application: The ...
2025-07-12 00:34:35
|
|
...Water Based Release Agent for Antivibaration Sealing Multiple Release Our Lubekote release agents can be used for damping, sealing and other ...
2025-07-12 00:34:35
|
|
Water-based Mold Release Agent for Bike Tires Rubber Lubekote 9925 There are two different types of mold release agents for tyres, silicone and non...
2025-07-12 00:34:35
|
|
... agent has a dry colorless coating, mainly used on rubber and plastic materials, has multiple release cycles, and does not transfer to the mold ...
2025-07-12 00:34:35
|