EVA Water Based Mould Release Agent For Polyurethane Shoe Soles Boots

Water Based Mold Release Agent For EVA Polyurethane Shoe Soles Boots

A water based release agent for PU boots.

For boots and shoes made from EVA, we have a new generation of EVA shoe sole mold release agent that will provide a very good, even and non-glossy appearance. It is now successfully used in Asia market.

For the EVA boots/shoes, the mold release agent currently using in the market mostly use silicone, so that the surface of shoes or boots is smooth, greasy or with spots. We have a new generation release agent which will provide a very good, even and non-glossy appearance. It is now widely used in Asia market. Below is a picture of their product:

Water Based Mold Release Agent for boots Advantages:

• Easy to use
• Demolding without touching up for long hours
• Prevents build up on the molds
• Excellent performance of produced parts
• Excellent release properties

Water Based Mold Release Agent for boots Application:

1. Molds should be clean before using.
2. Apply a thin coat of our release agent.
3. Wait until the water is evaporated.
4. Start production

Handling precautions:
For industrial use only.
Prolonged skin contact with high concentrate dilutions should be avoided. Accidental splashes in the eye should be washed out with copious amounts of water.
Do not allow product to freeze.

Shanghai Lorechem Co., Ltd. was established in 2008. It is a high-tech enterprise which is dedicated to serve releasing products which involve semi-permanent release agent, anti-sticking, surface lubrication and thermal reactive adhesive.