The analog circuit ,high-speed eddy current flaw detector,Digital
circuit
Descriptions
DS-MODEL-405H high-speed eddy current flaw
detector is suitable for online high-speed flaw detection of steel,
copper, aluminum, aluminum-clad steel, copper-clad aluminum,
copper-clad steel and other metal wires and wires, using analog
circuit detection to obtain damage signals, digital circuit
analysis, record and print, using standard damage adjustment can
record the number of large, medium and small three kinds of damage
points, which can facilitate the classification treatment of wire
and wire.The high-speed eddy current flaw detector has an independent test channel that can drive a detection probe,
and the detection channel is used for data acquisition to detect
longitudinal cracks and transverse defects in the production of
metal wire, and has high sensitivity to dark holes, porosity
impurities, open cracks and other axial defects.
DS-MODEL-405H high-speed eddy current flaw detector has a test
frequency range of 1Hz-999 KHz, which can adapt to the detection
high-speed requirements of various gold wires, and because the
analog and full digital design speed can reach up to 3200 meters
per minute, different frequencies control different detection
speeds.
| Frequency | 165Hz(155-310Hz) | 3Frequency and detection speed10Hz(310-625Hz) | 470Hz(470-940Hz) | 625Hz(625-999Hz) | | Detection speed | 625Hz(625-999Hz) | 900m/min | 1350m/min | 1800-2200m/min |
|
The high-speed eddy current flaw detector is equipped with output
control interface, which is convenient to connect the test site
with various equipment and work simultaneously, forming a highly
automated whole.
Specifications
High speed eddy current flaw detector| Frequency Range | 1 Hz－ 999KHz | | Gain range | 0-60dbcontinuously adjustable, step: 0.5dB | | Phase rotation | 0 ~ 360° continuously adjustable, step: 1 Deg | | Detection speed | 3-3200 m/min | | Probe type | External pass-through,place and comparison | | Operating voltage | AC220±10 v | | Operating Temperature | Tippically from -10°C to + 55°C | | Storage temperature | Tippically from -20℃ to +60℃ | | Relative humidity | Not more than 85% |
|
|
Other descriptions
1,DS-MODEL-405H high-speed eddy current flaw detector has
independent detection channel.
2,This high-speed eddy current flaw detector can synchronize alarm
output.
DS-MODEL-405H high-speed eddy current flaw detector operating
picture
