For the special use scenarios of medical devices, most medical
devices have extremely small structures and complex processes, so
only lasers can be selected for the welding processing. To tackle
the above-mentioned difficulties across the industry, this
equipment has equipped with a CCD magnified imaging monitor, which
ensures the harsh processing accuracy requirements of medical
devices. This equipment is widely used in the welding production of zebra
guide wires, disposable stone extraction baskets, disposable airway
guide wires, nasobiliary drainage catheters, and so on, effectively
solving the practical difficulties that microdevices in the medical
device industry cannot be precisely processed. At the same time,
the problem of structural sealing is taken into account in the
design of the equipment, which effectively solves the problem of
pollution prevention in high-purity medical device production
sites. Highlights - An domestic or imported fiber laser is used as the processing light
source, which has the characteristics of high energy, good beam
quality, fast welding speed, large aspect ratio, energy
concentration, small heat-affected area, and so on;
- The motion axis is driven by a servo motor, using precision ball
screws and linear guides as transmission elements with high
precision and high speed;
- The overall structure of the equipment is simple and convenient for
cleaning, daily maintenance, and other operations;
- This equipment only occupies a small floor area and does not
require any additional consumables during operation, which is
convenient and practical. At the same time, it can also be modified
and upgraded according to customer needs;
- This equipment adopts the sealed design for its structure, and its
power part is arranged with a sunken design, which effectively
protects the safety of operators;
- Equipped with the industrial CCD monitoring system to monitor the
product’s clamping and welding processes in real-time.
Technical Parameters | Dimensions (LW'H) | 1100X 600X 1800mm | | Performance Characteristics | With workpieces move on the X and Y axes, it can weld points,
straight lines, circles, squares, or any plane graphics composed of
arcs; | | Control Method | PC control, with a 17-inch LCD display; | | X-Axis Stroke (Electric) | 200mm, repeated positioning accuracy 士0.03mm | | Y-Axis Stroke (Electric) | 150mm, repeated positioning accuracy +0.03mm | | Z-Axis Stroke (Manual) | 300mm, repeated positioning accuracy 士0.05mm | | W Axis | Repeated positioning accuracy 士15arc-sec | | Drive Mode | Servo drive | | Welding Trajectory Input Method | CNC programming or teaching mode | | CCD Weld Monitoring | Equipped with a 17-inch LCD monitor makes it easy to observe the
processing quality and processing position; | | Welding Range | 200*150mm | | Maximum Welding Speed | It can achieve the maximum welding speed; | | Welding Software | UW’s exclusive welding software | | Worktable Power | Single-phase AC 220V, power 15KW | | Model of the Host | YAG; CW laser; QCW, etc. |
|
