177*13mm Exterior WPC Wall Panel Weather Shielded Vibrant Co Extrusion

177*13 Weather-Shielded & Vibrant Co-Extrusion Outdoor WPC Wall Panel

Product Summary

Engineered via simultaneous thermal co-extrusion, a dense, heavy-duty polymer shield encapsulate the high-strength core matrix symmetrically. This innovative armor delivers uncompromising weather defense, keeping the cladding perfectly intact against acid rain, intense UV radiation, and continuous tropical humidity. Boasting multi-chromatic natural color blending and a complete zero-maintenance profile, it serves as the ultimate design benchmark for luxury residential estates, commercial eco-resorts, and premium courtyard transformations.

About this Product

• mpregnable Polymer Shield

  • Engineered as a high-end second-gen outdoor WPC wall panel, the co-extruded shield completely seals the composite matrix, preventing internal fiber oxidation, crumbling, and deep moisture absorption.

• Multi-Tonal Natural Color Fade-Lock 

  • The cap layer incorporates premium multi-tonal streaking and fading inhibitors, mirroring the organic uneven hues of real luxury timber while completely locking the color against UV sun bleaching.

•  All-Weather Structural Integrity 

  • Formulated to withstand drastic thermal fluctuations from arctic freezes to tropical desert heatwaves without cracking, bowing, or separating from its protective outer armor.

• Zero Chemical Painting Maintenance 

  • This capped system eliminates the lifetime need for volatile organic chemical (VOC) sealants, solvent stains, or oils, ensuring your building exterior remains pristine using only rainwater rinses.

Technical Specifications

How to Install

Gap is King 

Never butt panels tight end-to-end; leave a 2-5mm thermal expansion gap. Always leave 25mm space behind the panels for airflow.

Solid Base 

Do not screw directly into concrete. Max joist spacing: 50cm.

Application Gallery

Colors

Our Factory

FAQ

Q1: Does this second-generation outdoor WPC wall panel trap heat on the building facade during summer?

A1: No. Our second-generation shield is engineered with advanced heat-reflective color pigments. Compared to traditional first-generation dark composites, this co-extrusion panel reflects a higher percentage of infrared light, helping to maintain a cooler ambient surface and reducing heat transfer into the building.

Q2: Can we install the second-gen co-extrusion panel directly in contact with garden soil?

A2: While the polymer shield provides unmatched water and rot resistance making it highly moisture-proof, we technically recommend maintaining a minimum 50mm clearance from the soil. This ensures the mandatory 25mm rear air gap remains unobstructed, allowing proper ventilation and drainage behind the facade.

Q3: How do I remove localized grease or barbecue oil splatters from the co-extrusion wall panel?

A3: Because the shield layer is completely non-porous, oil and grease cannot sink into the wood fibers. Simply apply standard household dishwashing soap directly onto the oil splatters, let it sit for a few minutes to break down the grease, then wipe it away with a soft cloth and rinse with warm water.

Q4: Is the polymer armor shell safe for eco-conscious architectural projects?

A4: Yes, 100%. The high-performance polymer used for the outer armor is chemically inert, entirely non-toxic, and fully recyclable. It does not contain or release any heavy metals, phthalates, or dangerous chemical preservatives into the surrounding soil or air, making it perfect for eco-villas and green builds.