Vertical Curing Ovens Double Lifting Small Composite Curing Oven

Compact Structure Double Lifting System SVR Series Vertical Curing Oven

    On-line vertical curing oven, compact structure, small footprint, maximum saving workshop space; High production efficiency, much higher than the traditional curing oven, especially for products requiring long curing time in the oven, which can effectively improve production capacity, the market demand for vertical curing oven is increasing, it will replace the traditional curing oven and become a trend.

Advantages:

• Effectively improve the capacity
• Enhance the curing quality
• Lower the use-cost
• Small occupying area and save

Main application:

    Chip bonding, under fill, components packing and other production process which needs thermo curing(.Include LED, FPC, automobile, 3C Electronic product,motor, instrument,communication and other industries)SVR-V series Especially suitable for long board curing, such as LED strips, FPC, etc.

Options:

Cooling unit

    1. Equipped with a cooling docking conveyor after the oven(option: water chiller for quick cooling);

    2. Equipped with a cooling stocker after the oven, large storage quantity.

Nitrogen system

    Equip with Nitrogen regulating flowmeter and the oxygen analyzer.

Heating system

    Available for 4 modules, 8 modules, 12 modules

Conveyor system

    The storage quantity and the spacing between boards can be customized according to the production process.

Rack

    Space can be reserved for the bottom fixture return line.

Temperature profile

a. The temperature profile of vertical oven is composed of heating stage and

constant temperature stage.

b. Test fixture: L260mm*W200mm*H20mm, temperature uniformity deviation ≤1℃

Product parameters:

Notices:

1.Power requirements:

①Three phase five wire: voltage 380V, frequency 50/60HZ;

②The wire diameter requirement is 16mm², with a leakage protection switch of 125A and a leakage capacity of 150-200mA.

2.The ground is required to withstand a pressure of 1000kg/m².

3.External ventilation requirements:

①Specification of heat dissipation exhaust duct Ø250mm; Exhaust air volume 15M³/min;

②Specification of exhaust duct Ø100; Exhaust air volume 5M³/Min.