Ocean Dolphin Inflatable Arches 8*6m For Party Event Outdoor Advertising

Ocean Dolphin Outdoor Inflatable Advertising Arch For Party Event

This image shows two towering frameworks connected by a curved structure, resembling an amusement ride or a decorative building. Each tower is topped with a blue spire, and they are linked in the middle by a yellow, semi-circular construct.
On the top of the left tower, there is a small blue sculpture, and a similar sculpture is found on the top of the right tower. The whole scene gives off a fairy-tale-like atmosphere with its bright colors and imaginative design.

Specifications:

Usage tutorials for some common inflatable products:
Inflatable arch:

Preparation before use: Select an appropriate placement site. Ensure the ground is flat, without sharp objects and with sufficient space. Also, consider the surrounding environment and avoid areas with branches or communication cables that might damage the arch. Secure the power cord to prevent interference during operations like opening and closing the door. Check the weather forecast. In case of wind, prepare fixed ropes and extra sandbags. If the wind force exceeds level six, it's not advisable to use. Deployment and fixation: Open the arch bag and unfold the arch. Tie ropes to the two front rope buckles of the arch and do the same for the two at the back. Put sandbags into the two feet on the ground to enhance the arch's stability. Inflation and adjustment: Use an air pump or similar inflation equipment to inflate the arch. While inflating, observe if the arch's shape is normal and if there are any distortions or deformations. Adjust the arch's position. If it's unstable, use the ropes on the front and back rope buckles to secure it.

FAQ
Q: How to repair when damage?
A:
Step 1: Identify the Damage
Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.
Step 2: Clean and Dry the Area
Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage
Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive
If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry
Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair
Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-
Q: Accessories included?
A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo .