Compressor Moisture Separator For Laser Cutting
|
|
Product Description
Working Principle The compressed air gas-water separator is composed of a housing, a cyclone separator, and sewage components. When the compressed air containing a large amount of oil and water solid impurities enters the separator, it spins down along its inner wall. The centrifugal effect produced causes the liquid water to separate out of the vapor stream and flow down the wall. Under the action of gravity, it flows into the separator. The bottom of the device is discharged by the Automatic Drain Valve.
Feature & Benefit ①99% Separation efficiency from compressed air system ②Zero pressure drop, saving energy and money ③Internal & external anti-corrosion treatment, increase spanlife and ensure separation efficiency ④With Strong structure, 15 years warranty, cost reasonable
Technical Specification The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.
Success Case |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
