101 - 110 of 203
customizable silicon carbide rod
Selling leads
|
... of 4/9 or 6/12 can be selected. Of course, sometimes if the electric furnace is very small, a diameter of 3/6 can be used (mainly depending on the ...
2026-04-17 00:37:47
|
|
SPK MoSi₂ heating element Silicon molybdenum rods soften slightly at high temperatures (above 1500 degrees) and become hard and brittle at low ...
2026-04-17 00:37:47
|
|
SPK MoSi₂ heating element Silicon molybdenum rod is made of molybdenum disilicide powder. Molybdenum disilicide is an intermediate phase with high ...
2026-04-17 00:37:47
|
|
The U-shaped silicon-molybdenum rod heating element is a core heating component for high-temperature industrial heating applications. Thanks to the ...
2026-01-29 18:54:43
|
|
U type Mosi2 Heating elemet U-shaped silicon molybdenum rod: Double handle U-shaped design components are the most commonly used type. The heating end ...
2026-04-17 00:37:47
|
|
W type Mosi2 Heating Element W-shaped silicon molybdenum rod, comprising a heating part with a W-shaped structure and two cold ends, each end of the ...
2026-04-17 00:37:47
|
|
1. Silicon carbon rod clamp fixing clamp connection belt, the connection wire of the contact element is made of aluminum braided belt or multi-layer ...
2026-04-17 00:37:47
|
|
L Type Silicon Molybdenum Rod Heating Element In the field of industrial high-temperature heating, the L-shaped molybdenum disilicide heating element, ...
2026-01-29 18:54:43
|
|
...knocking. Before installing the rod, an iron pipe with the same diameter as the rod can be used for trial installation. The use of silicon carbide ...
2026-04-17 00:37:47
|
|
...silicon carbide rod Before installing and using the silicon carbide rod, check the resistance (Ω) value marked on the cold end. If the handwriting ...
2026-01-29 18:54:43
|