25kW Safe Protection High-Temperature Box Furnace For Electronic Components

I. Basic Equipment Information  
Name/Model: HBF52-17O High-Temperature Box Furnace  
Application Fields:  
High-temperature sintering processes for ITO targets, microwave ferrites, magnetic materials, electronic components, ceramic filters, etc.  

II. Core Technologies & Performance Specifications  
Temperature Parameters  
Rated Temperature: 1650°C  
Maximum Temperature: 1700°C  
Temperature Stability: ±1°C (PID auto-tuning function)  
Temperature Uniformity: ±5°C (tested after 2 hours of empty furnace stabilization at 1650°C)  
Control Thermocouple: Type B (single-point measurement at side center)  
Programmable Segments: 4×16 segments  

Heating & Power  
Heating Elements: U-shaped silicon molybdenum rods  
Maximum Heating Power: 25kW  
Empty Furnace Holding Power: ≤10kW  
Heating Rate:  
RT→1200°C: ≤5°C/min  
1200→1700°C: ≤2°C/min  
Surface Temperature Rise: ≤40°C  

Chamber & Atmosphere  
Effective Dimensions: 350×300×500mm (W×H×D)  
Furnace Atmosphere: Air/oxygen (requires gas supply pressure of 0.2~0.4MPa)  
Exhaust System: Top-mounted automatic chimney cover  

III. Safety & Protection Features  
Over-temperature and thermocouple failure alarms (audible & visual)  
Automatic power cutoff for over-temperature protection  

IV. Physical Parameters  
Dimensions: 1620×1960×1220mm (W×H×D)  
Weight: ~950kg  
Color: Light gray  

V. Operating Environment Requirements  
Environmental Conditions  
Temperature: 0~40°C  
Humidity: ≤80% RH  
No corrosive gases or strong airflow disturbances  

Gas Supply & Ventilation  
Gas Source: Clean, dry compressed air/high-purity oxygen (consumption: 2~6m³/h)  
Ventilation: Requires exhaust system (minimum capacity ≥10m³/h)  

Installation Conditions  
Floor: Level, vibration-free, load-bearing >300kg/m²  
Power: 3-phase 5-wire, ≥34KVA, 220/380V, 50Hz (wire color code: L1 yellow/L2 green/L3 red/N blue/PE yellow-green)  
Installation Space: 2000×3000×1500mm (minimum floor area: 3m²)

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.

1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.