141 - 150 of 801
standard test finger probe
Selling leads
|
... for anti-electric shock testing with pluggable banana plugs and amphenol connector at the end of the handle , or used for enclosure protection ...
2024-12-09 10:54:17
|
|
...ween the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely ...
2024-12-09 13:06:35
|
|
...Probe Standard: IEC60065 clause 9.1.3,EN61010-1, UL3101-1 and CSA 1010-1. Application: This testing probe is used to verify the protection against ...
2024-12-09 12:31:11
|
|
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or ...
2024-12-09 12:31:11
|
|
...Test Probe 2 With Force of 30N, IP Code - IP2X The product is made of nylon and stainless steel. The nylon part of the handle is black, and the ...
2024-12-09 13:48:57
|
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-07-26 20:00:12
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|