201 - 210 of 530
pressure immersion test device
Selling leads
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is ...
2024-12-09 10:47:48
|
|
... standard requirement of ISO 4532. It is used to judge the impact resistance of the vitreous and porcelain enamels. As the below picture shown, ...
2024-12-09 10:55:33
|
|
....1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on ...
2024-12-09 11:18:09
|
|
... electric energy metering cabinet, substation cable switchboard and cable junction box with vertical impact tester or pendulum impact device. Its ...
2024-12-09 11:49:26
|
|
Portable Lanterns / Light Testing Equipment High Performance Product information: The device is used to detect adjustment device, and confirm to the ...
2024-12-09 10:47:48
|
|
Calibration Device Impact Testing Machine for Spring Operated Impact Hammer Product information: The Calibration device for spring hammer is designed ...
2024-12-09 11:14:01
|
|
...Device For Housing Equipment Products Introduction The device is based on IEC60598-1 Luminaires –Part 1: General requirements and tests clause 4.13...
2024-12-09 12:49:00
|
|
IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights IEC 60811-3-1 clause 8.2.3 Position of the test piece in the test ...
2024-12-09 17:22:10
|
|
IEC60884-1 IPX8 Water Tightness Pressure Tester Pressure Adjustment Rang 0 ~ 6bar Product Introduction The IPX8 Water Tightness Pressure Tester is ...
2024-12-09 12:34:39
|
|
...Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11...
2024-12-09 10:47:48
|