171 - 180 of 530
pressure immersion test device
Selling leads
|
...Testing Machine Product details: It is designed and manufactured according to BS1363.1 standard 12.9.4 fig 32 which can be used to test the stress ...
2024-12-09 10:47:48
|
|
...(s) without undue damage to the conductor(s). Appliance is apparatus of checking damage. The terminal is placed in the test apparatus according to ...
2024-12-09 10:47:48
|
Impact Testing Mechanical Testing Machine Calibration Device For Spring Impact Hammer As Per Annex B
|
... of the pendulum 30mm Balance weight 2J Copper weight 1 piece Material Stainless steel Description: This device is
2024-12-09 11:49:57
|
|
...Test Ehc Vertical Hammer Electromagnet Release Tester Of 2J 5J 10J 20J 50J Product Introduction This device conforms to the standard requirement of ...
2024-12-09 12:42:42
|
|
...Device With 90° And 120° Sector-Shaped Profile IEC 60811-3-1 clause 8.1.3 Position of each test piece in the test apparatus The indentation device ...
2024-12-09 17:07:01
|
|
...Testing Machine Nylon Base 1000*1000mm Thickness 8mm Introduction: This device conforms to the standard requirement of the IEC60068-2-75 Test Ehc. ...
2026-05-01 00:03:02
|
|
...content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I ...
2024-12-09 10:47:48
|
|
...-outlets shall not impose undue strain on these socket-outlets. Compliance is checked by engaging the device, as during intended use, with the ...
2025-08-13 15:15:13
|
|
...), and it is applicable for waterproof testing of the electrical and auto parts under high temperature and high pressure. Confirm to standards: IEC ...
2024-12-09 12:01:19
|
|
IEC 60335-1 Test Finger Probe For Test Nails The maximum applied pressure is 30N Product description of Test Finger Probe: 1. The test nails are made ...
2024-12-09 22:42:21
|