411 - 420 of 631
iec test finger
Selling leads
IEC 60065:2014 clause 15.4.3 b Torque Wrench Standard: Conforms to IEC 60065:2014 clause 15.4.3 b) and IEC60598.1, IEC60950.1 Product information: SDB ...
2024-12-09 12:31:11
|
... 8 and annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements ...
2024-12-09 11:10:17
|
IEC 60884-1 figure 21 Power Cord Flexing Tester With 6 Sets Of Clamps Product Introduction The plug cord flexibility test apparatus is designed and ...
2024-12-09 12:34:39
|
... to a compression test by means of an apparatus as shown in figure 38, the test being made in a heating cabinet at a temperature of (80 ± 2) °C. ...
2024-12-09 13:07:41
|
... requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar ...
2024-12-09 13:09:44
|
... – Part 1: General requirements' clause 24.7, figure 28. Application of Plug Socket Tester: This device is use for test the abrasion resistance ...
2024-12-09 18:04:49
|
.... It is used to prepare the dumbbell Test Piece. Cable Testing Equipment The IEC 60811 series specifies the test methods to be used for testing ...
2025-07-17 00:02:27
|
..., blows shall be applied to the enclosure to be tested. The test shall be done by using one of the test apparatus described in IEC 60068-2-75. The ...
2024-12-09 13:27:07
|
...testing machine with adjustable height and impact speed for flexible testing Standard: IEC60068-2-75 Environmental testing - Part 2-75: Tests - ...
2025-07-17 00:02:28
|
...Test Apparatus Impact Testing Machine For Drop Ipact Resistance Standard: IEC 60068-2-75 Test Ehc: vertical hammer, UL498 clause SD7.2 Application: ...
2024-12-09 12:07:22
|