291 - 300 of 686
iec test finger
Selling leads
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
... as described in IEC 60068-2-75 (test EHA), with an equivalent mass of 250 g. The specimens are mounted on a sheet of plywood, 8 mm nominal ...
2026-07-01 00:42:15
|
|
... of IEC 60598-2-8 clause 8.16.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be ...
2024-12-09 13:39:37
|
|
IEC 60884 Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke Standard of Apparatus for abrasion test on ...
2026-07-01 00:42:15
|
|
...Testing Equipment - High-Pressure Watertight Test Chamber, Precision Pressure Control for Reliable Waterproof Validation Product Introduction for ...
2026-07-01 00:42:15
|
|
IEC 60884-1 2013 Clause 24.4 Low Temperature Tensile Strength Testing Machine Product information: The HT Apparatus for impact test at low temperature ...
2024-12-09 10:47:48
|
|
...Light Testing Equipment IEC 60598-2-13 Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 ...
2024-12-09 11:09:26
|
|
...Test Device Description: This device is suitable for drop impact test for equipment enclosure, verify the merchanical strength of equipment ...
2024-12-09 11:47:50
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
..., motorcycle, electrical products. Confirm to standards: IEC 60529 IPX1, IPX2; EN 60529 IPX1, IPX2; IEC 60598-1; IEC 60335-1 and so on. Test sample...
2024-12-09 12:01:19
|