IEC 60884-1 2013 Clause 24.4 Low Temperature Tensile Strength Testing Machine
|
IEC 60884-1 2013 Clause 24.4 Low Temperature Tensile Strength Testing Machine
Product information: Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on Application: This device is use for checking the impact resistance at low temperature of electrical accessories, as well as wires and cables. Test sample: Electrical accessories, surface type mounting boxes, screw glands, covers, wires and cables etc. Feature: This device should be used with low temperature chamber, the device should be placed on the sponge rubber pad of about 40mm thick, and should be put in the low temperature chamber before and during the test.
Technical parameters:
Table1 For power cables for fixed installation, the mass of the hammer for testing the samples shall be as given in the following table:
Table 2 For flexible cables and cords and telecommunication cables, the mass of the hammer for testing the sample shall be as follows:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: tensile strength testing equipment tensile testing equipment |
![]() |
6 Station Power Cord Bending Tester Standard IEC884-1 Tensile Strength Testing Machine |
![]() |
Power Cord Bending Tester Accurately Test Tensile Strength 6 Test Stations Support 1 - 999999 Times Bending Test, With A Flexible And Adjustable Rate Of 10 - 60rpm |
![]() |
UL817 Power Cord Bending Tester 6-station Intelligent Detection Tensile Strength Test ±180° Adjustable High Precision Durable Design |
![]() |
IEC60884-1 Figure 11 Tensile Strength Testing Machine |
![]() |
IEC60065 figure 6 Tensile Strength Testing Machine Dielectric Strength Testing Machine |
![]() |
Low Temperature Tensile Strength Testing Machine Impact Test Device GB2099.1-2008 |