131 - 140 of 147
iec 61032 test finger probe
Selling leads
|
Diameter 50mm Test Probe A Made Of Stainless Steel And Nylon, Accord With IEC60529 IP1 Product introduction: This probe made of stainless steel and ...
2024-12-09 13:31:30
|
|
...Safety – Part 1: General requirements clause 8.1.4; Application of IEC 60335-1 Testing Equipment: This device complies with the standard IEC60335-1 ...
2024-12-09 22:27:36
|
|
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against ...
2024-12-09 13:06:50
|
|
UL507 Probe for Film-coated Wire ELECTRIC FANS TEST 101.6mm length 19.05mm Diameter Description in UL507 Clause 9.1~9.3: 9 Accessibility of Live Parts ...
2024-12-09 13:32:59
|
|
...ensure the safety of electrical equipment. This device strictly follows international standards and is a core tool for testing the anti-electric ...
2025-07-12 20:00:23
|
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
... test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used ...
2024-12-09 22:22:38
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
UL1278 UL507 Probe for Film-coated Wire 19.1 mm to Verify Accessibility of Live Parts Description in UL1278 Clause 8.1~8.5: 8 Accessibility of Live ...
2024-12-09 13:28:06
|