81 - 90 of 147
iec 61032 test finger probe
Selling leads
|
Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. ...
2024-12-09 13:00:26
|
|
... – Part 1: General requirements clause 8.1.1, 8.2, 22.1, 29.1, 29.2 and ect.; IEC 61032 Protection of persons and equipment by enclosures –Probes ...
2024-12-09 22:27:36
|
|
IEC 60335-1 Home Appliances Testing Equipment Test Probe 18 of IEC 61032 Standard of Electrical Appliance Testing Equipment: IEC 60335-1: 2020 ...
2024-12-09 22:27:36
|
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test ...
2024-12-09 13:07:58
|
|
... for earth or antenna or for audio, video or associated signals, shall not involve the risk of an electric shock. The test is not applied to ...
2024-12-09 13:32:59
|
|
...ough the tip of a straight unjointed test finger, test probe 11 of IEC 61032. This finger with an electrical indicator as described above is ...
2024-12-09 13:51:51
|
|
.... It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. ...
2024-12-09 19:07:30
|
|
...: 13.2 Test conditions for first characteristic numerals 1 , 2, 3, 4 The object probe is pushed against any openings of the enclosure with the ...
2024-12-09 13:08:07
|
|
IEC 60065 Test Probe C 2.5mm Diameter 100mm Length for HAZARDOUS LIVE TEST IEC60065-2014 Clause 9.1 .5 Pre-set controls If a hole giving access to pre...
2024-12-09 13:32:06
|