161 - 170 of 176
iec 60598 test finger probe
Selling leads
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the ...
2024-12-09 10:55:33
|
|
... test probe C and IEC60529 for IP3 and suffix C codes. It is used to verify the protection of persons against access to hazardous parts, also used ...
2024-12-09 22:22:38
|
|
...Test Equipment Test probe 2 - 12.5mm steel ball IEC60335-1 Clause 22.1: If the appliance is marked with the first numeral of the IP system or any ...
2024-12-09 13:32:59
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
...pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Test sample: Easily ...
2024-12-09 12:31:11
|
|
UL1278 UL507 Probe for Film-coated Wire 19.1 mm to Verify Accessibility of Live Parts Description in UL1278 Clause 8.1~8.5: 8 Accessibility of Live ...
2024-12-09 13:28:06
|
|
...verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or ...
2024-12-09 12:31:11
|
|
IEC60950-1 Test Pin For Information Technology Equipment Test , Tip Diameter 3mm IEC60950-1 clause 2.1.1.1 Access to energized parts c) A test with ...
2024-12-09 17:22:10
|
|
... probe is pushed against any openings of the enclosure with the force specified in table 7. First character- istic numeral Test means (object ...
2024-12-09 13:13:06
|
IEC 60529 Diameter 12.5mm Rigid Sphere Probe With Force Of 10N-50N IP First Characteristic Numeral 2
|
IEC 60529 Diameter 12.5mm Rigid Sphere With Force Of 10N-50N IP, First Characteristic Numeral 2 Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. ...
2024-12-09 13:51:51
|