631 - 640 of 854
500w flammability testing equipment
Selling leads
|
Heat Exchanger Vacuum Chamber Helium Leak Test System 30 s/pc Leak Detection Rate 1.0E-5mbar.l/s The series of system is able to run the following ...
2024-12-09 11:51:21
|
|
Sand And Dust Test Chamber HH0810 Description: This is to verify the seal performance of the enclosures of the product to determine the effects of ...
2024-12-09 12:01:19
|
|
IEC 60335-1 Temperature Recorder For Temperature Rising Test 8 Channels,0 – 400Ω,0– 10000Hz product introduation This instrument conforms to standard ...
2024-12-09 12:19:06
|
|
IEC 60065:2014 clause 9.1.5 Ragid Test Probe with Force Standard: Conforms to IEC 60065:2014 clause 9.1.5, IEC61032 figure 3 test probe C, IEC529 IPX3...
2024-12-09 12:31:11
|
|
IEC60065:2014 Annex H.2.3 Winding Test Device Standard: Conforms to IEC60065:2014 Annex H.2.3 Application: It is used for testing the flexibility, ...
2024-12-09 12:31:11
|
|
Shell anti electric shock IEC 61032 figure 2/ IEC 60529 standard test finger with thrust 10N 20n 30n Standard: IEC 60884-1 2013 clause 23.2, VDE0620 ...
2024-12-09 13:00:26
|
|
IEC60065 Clause 8.21 Mandrel Test Device, 10° and 230° Rotate Angle IEC60065:2014 Clause 8.21 8.21 Non-separable thin sheet material shall comply with ...
2024-12-09 13:35:45
|
|
48rpm Label Marking Abrasion Test Machine - 20mm Test Stroke A.1 Markings on controls shall be adequately indelible for safety and are therefore ...
2024-12-09 13:49:13
|
|
IEC60950-1 Annex AA Mandrel Test Device With Three 50N weights IEC60950-1 Annex AA Three test samples, each individual sample consisting of three or ...
2024-12-09 17:07:01
|
|
IEC60990 Figure 4 - 1500Ω Touch Current Measurement Circuit Network for Facilitated Testing Product Introduction The test network adheres to the ...
2025-01-08 16:44:19
|