Lampholder Copper Contacts Security Thrust Test Device IEC60598-2-20
|
IEC60598-2-20 Lampholder Copper Contacts Security Thrust Test Device
Product information: The test apparatus is used to check security of lampholder contacts, avoid the lamp holder contacts shifting and the live parts of the lamp string becoming accessible which are caused by the frictions.
Technical parameters:
The test device is conform to the IEC60598-2-20 clause 113,Fig 2. It is made of stainless steel. Weights: one 15 N and one 30 N
Test method: The incandescent lamp is removed and a force of 15 N is applied for 1 min to each of the conductors connected. Following this, a force of 30 N is applied for 1 min to the two conductors together. The forces are applied at a distance of 3 ± 0,8 mm from the insertion points in the lampholder so as to try to move the contacts from the lampholders. During the test the contacts shall not move more than 0,8 mm.
|
Product Tags: led light tester luminaire testing |
![]() |
PLC Control Light Testing Equipment Conforms To IEC60598 Clause 4.14.3 Easy To Operate |
![]() |
IEC60598-2-8 Impact Tester For Handlamps With 400mm And 1000 Mm Impact Height |
![]() |
IEC62560 Clause 15 Circuit Figure 8 Light Testing Equipment For Non - Dimmable Lamp |
![]() |
Digital Control Lamps Light Testing Equipment Adjustment Devices Of Torsion And Bending Test According To IEC60598 |
![]() |
PLC Control LED Light Tester , 250v Self Ballasted Lamp Switches Endurance And Load Integrated Test System |
![]() |
IEC60669-1 LED Testing Equipment / Self Ballasted Lamp Switches Fully Automatic Breaking Capacity Endurance Tester |