261 - 270 of 417
2 5mm iec test equipment
Selling leadsIEC 60529 Diameter 12.5mm Rigid Sphere Probe With Force Of 10N-50N IP First Characteristic Numeral 2
|
IEC 60529 Diameter 12.5mm Rigid Sphere With Force Of 10N-50N IP, First Characteristic Numeral 2 Standard:IEC61032 figure 6 probe 2,IEC60529 of IP2. ...
2024-12-09 13:51:51
|
|
...per IEC 60335-2-11 clause 20.101, IEC 60335-2-6 clause 22.108, IEC 60335-2-24 clause 22.112. Suitable for testing tumble washing machine / dryer ...
2024-12-09 12:44:54
|
|
... according to A.1.2 is checked by the following tests: A.2.1 The markings under consideration shall withstand drops of detergent standing on the ...
2024-12-09 13:07:33
|
|
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm Product Introduction: Impact durability test system for hammer is ...
2025-07-31 00:02:14
|
|
... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured ...
2024-12-09 10:55:03
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2024-12-09 12:01:19
|
|
Shell anti electric shock IEC 61032 figure 2/ IEC 60529 standard test finger with thrust 10N 20n 30n Standard: IEC 60884-1 2013 clause 23.2, VDE0620 ...
2024-12-09 13:00:26
|
|
Integrated Test Device For Circular Saw Switch And Lower Guard, 0-250V/5KW Built-in Load Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, ...
2024-12-09 13:48:57
|
|
... diameter (d) of the test piece (mm) Number of turns D≤2.5 10 2.5﹤d≤4.5 6 4.5﹤d≤6.5 4 6.5﹤d≤8.5 3 8.5﹤d 2 Test condition: The diameter of the ...
2024-12-09 11:56:30
|
|
IEC 60730 Standard 20mm Stroke Marking Durability Tester Standard Compliance The apparatus adheres to the standards set in IEC 60730 - 1:2015, ...
2025-07-31 00:02:15
|