521 - 530 of 901
10a cable testing equipment
Selling leads
|
...Test Apparatus Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire ...
2024-12-09 10:47:48
|
|
...cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated ...
2024-12-09 12:33:59
|
|
... used insulation and sheath materials (elastomer, polyvinyl chloride, polyethylene, polypropylene, etc.) of wires and cables at high temperature. ...
2024-12-09 13:39:56
|
|
...Testing Equipment Needle Flame Test Apparatus product information: This part of IEC 60695 specifies a needle-flame test to simulate the effect of a ...
2024-12-09 11:56:30
|
|
Low Temperature Test Chamber Product information: The low temperature test chamber conforms to IEC540 standard which is applicable for the low ...
2024-12-09 10:47:48
|
|
Effortless UL486A-B Cable Conductor Damage Testing Two-Station Device with Guide Screw Structure and Sound Alarm HC9903B Standard: Complies with ...
2026-06-20 00:34:53
|
|
... diameter (d) of the test piece (mm) Number of turns D≤2.5 10 2.5﹤d≤4.5 6 4.5﹤d≤6.5 4 6.5﹤d≤8.5 3 8.5﹤d 2 Test condition: The diameter of the ...
2024-12-09 11:56:30
|
|
...IEC60811-1-2,IEC60335-1,IEC60335-2-17 and IEC60245-2 etc. It is suitable for the aging test in the oxygen and compressed air to the wire and cable, ...
2024-12-09 10:53:46
|
|
IEC60811-3-1 High Temperature Indentation Device Equipped With 30 PCS Weights IEC 60811-3-1 clause 8.2.3 Position of the test piece in the test ...
2024-12-09 17:22:10
|
|
IEC 60811-2-1 Mineral Oil Immersion Test Apparatus Products Introduction This apparatus conforms to IEC 60811-2-1, IEC 60811-404. It is suitable for ...
2024-12-09 12:34:08
|