171 - 180 of 278
alloy 1 4765 furnace wire
Selling leads
|
... have good form stability at high temperature. TANKII APM forms an excellent, non-scaling surface oxide, which gives good protection in most ...
2025-04-25 07:37:09
|
|
...alloy 750 Bright and Annealed Heating Wire 1Cr13Al4 is an iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 750°C (1382°F)...
2024-12-09 13:27:49
|
|
... furnaces and electrical kilns. FECRAL Has less hot strength than Tophet alloys but much higher melting point. Shanghai TANKII ALLOY MATERIAL Co., ...
2025-04-24 08:32:24
|
|
...Alloy is Nichrome ribbon, which is a type of Nichrome Heat Alloy. This alloy is made up of approximately 80% nickel and 20% chromium, with trace ...
2024-12-10 00:10:21
|
|
...aluminium alloy which can be used at temperatures up to 1350degrees. Typical applications for 0Cr21Al6Nb are as electrical heating elements in high...
2024-12-09 12:21:14
|
|
... temperature strength, very good form stability and weld ability. It is widely used in electrical heating element material, resistor, industrial ...
2024-12-09 12:23:22
|
|
...Alloy for Heaters Element FeCrAl alloys are characterized by excellent oxidation resistance and very good form stability resulting in long element ...
2024-12-09 12:33:32
|
|
NiCr 80/20 Nickel Alloy Electric Heating Resistance Nichrome Ribbon (Ni80Cr20) Ni80Cr20 is a nickel-chromium alloy (NiCr alloy) characterized by high ...
2024-12-09 12:38:11
|
|
...Alloy 0Cr25Al5 0Cr21Al6 For Vacuum Heater FeCrAl alloys are characterized by excellent oxidation resistance and very good form stability resulting ...
2024-12-09 12:47:21
|
|
CuNi 23 /nickel alloy 30/Cuprothal 30 Copper Nickel 23 or CuNi23Mn is a copper nickel alloy with the addition of Manganese to produce an alloy with a ...
2024-12-09 13:25:29
|