21 - 30 of 31
aws block iso
Selling leads
|
... block. It is an international standard test block approved by the International Welding Institute (IIW) and recommended by the International ...
2024-12-09 23:55:11
|
|
... of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Material: Test Report according to ISO 10474-3.1.B,JIS G ...
2024-12-09 22:08:10
|
|
...block Standard: ISO2400-1972E IIW test block (V-1 test block) is also called Dutch test block. It is an international standard test block approved ...
2024-12-10 00:39:20
|
|
...Block IIW V1 Block IIW V1 calibration block Standard: ISO2400-1972E IIW test block (V-1 test block) is also called Dutch test block. It is an ...
2025-07-10 07:30:29
|
|
...Blocks NDT Instrument IIW V1 calibration block Standard: ISO2400-1972E IIW test block (V-1 test block) is also called Dutch test block. It is an ...
2024-12-10 00:35:38
|
|
PT specimen Reference Test Block Type II ISO 3452-3: 2013 describes two types of reference blocks - Type 2 reference blocks are for routine assessment ...
2024-12-09 23:16:19
|
|
...Block Magnetic Particles Cracked Test Piece EN ISO 9934-2:2002 Cracked Test Piece for the Evaluation of Magnetic Particles The MTU-3 Test Block is ...
2024-12-09 23:16:19
|
|
.... Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS ...
2024-12-09 18:45:33
|
|
Leeb Hardness Blocks for Leeb Hardness Tester Purpose: The hardness block for the Leeb hardness tester is mainly used to calibrate and verify the ...
2025-07-12 00:13:12
|
|
...block Model:YM-C All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements ...
2024-12-09 20:06:39
|