Automatic TIG Welding Machine HWASHI Transformer EI Lamination Core

HWASHI Transformer EI Lamination Core Automatic TIG Welding Machine

DESCRIPTION

The machine is designed as automatic assembly welding for transformer E, I lamination assembly. After clamping by the cylinders and being fixed, the welding gun will enter into welding area at constant speed under the effect of servo motor. Then the welding gun will finish the welding process. In order to achieve higher automatic, we designed the machine with feeding and discharging conveyer belt. It can help to save more labor force and increase production rate

FEATURES

1. After assembly of the E piece and I piece, the electric reactor will enter into feeding conveyer belt, then enter into horizontal feeding cylinder area under the effect of adjustable-speed motor.

2. The horizontal feeding cylinder will action, pushing the work piece into vertical feeding cylinder area.

3. Afterwards, the vertical feeding cylinder will action, pushing the work piece into flat welding area. The left and right leveling cylinder will level off the work piece and compress it. The upper cylinder will action to compress the work piece.

4. Then the left and right leveling cylinder will return to original position. Later, the servo motor starts to drive the welding gun into welding area. Then the welding gun will start welding.

5. After finishing the setting welding length, the servo motor will drive the welding gun to reset. The upper cylinder will reset, then the discharging cylinder will action, pushing the welded work piece into discharging conveyer belt. Under the effect of conveyer belt, the work piece will be conveyed to the next process.

Applicable area

Automatic assembly and welding of EI lamination