11 - 20 of 81
cold rolled u bend tube
Selling leads
|
... are made from seamless, cold-drawn low-carbon steel tubes. These Carbon Steel U Bend Tubes are usually used in oil and gas plants, chemical plants...
2025-05-11 09:36:37
|
|
... weldability. These tubes are produced through a cold drawing process, which enhances their strength and allows for tighter tolerances. The bending ...
2025-05-11 09:34:50
|
|
...TUBE ASTM A213 / ASTM A269 COLD ROLLING BA (Bright annealed), is a specific surface finish which is produces by the mills for cold-rolled stainless ...
2025-05-06 20:57:06
|
|
Carbon steel seamless Boiler Tube, U bend tube, ASTM A179 ,A178 Gr.B, A210 A1 Seamless cold-drawn tube for tubular heat exchangers, condensers, and ...
2025-05-06 20:50:08
|
|
... the ASTM B111 standard. The ASTM B111 standard outlines the requirements for Seamless Copper and Copper-Alloy Condenser and Heat Exchange Tubes, ...
2025-05-06 20:50:41
|
|
...Tubes. ASTM A179/A179M includes seamless cold-drawn mild steel tubes of minimum wall thickness for tubular heat exchangers, condensers, and similar ...
2025-05-06 20:52:19
|
|
...TP304 Stainless Steel Seamless U Bend Tube for Heat Exchange application After U bend (cold forming), heat treatment of bending portion may be ...
2025-05-06 20:51:38
|
|
... radius as per customer drawings. The bend portion and six inch leg is stress relieved by resistance heating. Inert gas (Argon) is passed through ...
2025-05-06 20:48:42
|
|
.... The bend portion and six inch leg is stress relieved by resistance heating. Inert gas (Argon) is passed through it at the required flow rate to ....
2025-05-06 20:49:26
|
|
...Tube U Bend Tube ASTM A179 A210 A1 ASTM A179/A179M is Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat Exchanger and Condenser ...
2025-08-03 00:01:30
|