Used Measuring & Analysing Instruments

Thermal Cycling Test Chamber Cold and Heat Climatic Test Chamber 4000L Complied Standards & Clauses It conforms to the following standards: IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

Electromagnetic Vibration Tester Automotive & Electronics Testing Complied Standards & Clauses Sinuo can provide you with the whole excitation and testing scheme, and prove the quality of the products for you according to national and international standards, such as GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM,IEC62133 UN38.3 UL2054 IEC 60086 ECE R100., etc. Product Overview The SN553... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IPX3/IPX4 Spray Nozzle with Digital Flowmeter Waterproof Testing Equipment IPX3 IPX4 Spray Nozzle with Digital Flowmeter IP Testing Equipment for Electronics provides comprehensive waterproof testing solutions for automotive components and electronic enclosures. Compliance Standards Meets the requirements of IEC 60529-2013 "Degrees of protection provided by enclosure (IP code)" IPX3 and ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC62196-1 EV Connectors Cable Anchorage Pull Force And Torque Test Equipment Product Information This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Compliance Standards It is designed and manufactured according to IEC62196-1: 2022 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 62196-1:2022 AC/DC Anti-Shock Probe Tester for EV Charging Connector Safety Test Product Overview The AC/DC Anti-Shock Probe Tester is designed for EV charging connector and electrical safety testing according to IEC 62196-1:2022 clauses 10.1, 10.2, and 26.6. Used together with a test probe, this device detects whether accessible conductive parts are energized by applying AC/DC test voltage. ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 60529 IPX8 50M Water Pressure Continuous Immersion Test Equipment Complied Standards & Clauses IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX8. Equipment Overview Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc Structure: The test ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 60695-11-3 500W 50W Horizontal and Vertical Flame Test Chamber Complied Standards & Clauses UL 94 “Tests for Flammability of Plastic Materials for Parts in Devices and Appliances” IEC 60695-11-3 “Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods” IEC 60695-11-10 “Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

VW80000 Electric Vehicle Electric Components Condensation Test Chamber Complied Standards & Clauses ISO 6270-2 Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres VW80000 clause 12.6 Electric and Electronic Components in Motor Vehicles up to 3.5t General Requirements, Test Conditions, and Tests IEC 61300-2... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

Programmable Salt Spray Fog Corrosion Test Chamber Complied Standards & Clauses This chamber is required by many standards such as ASTM-B117, GJB150, DIN50021-75, ISO 3768, ISO 3769, ISO 3770, CNS 3627, CNS 3885, CNS 4159, CNS 7669, CNS 8866, JISD-0201, H-8502, H-8610, K-5400, Z-2371, etc. Equipment Overview This chamber is used to verify the corrosion resistance of iron metal or the iron metal ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC60529 IP5/6X EV Charge Station Walk-In Sand & Dust Test Chamber Complied Standards & Clauses IEC60529:2013 "Degrees of protection provided by enclosure (IP code)" IP5X and IP6X. Equipment Overview This equipment is suitable for testing electronic and electrical products, automobile and motorcycle accessories, and seals in sandy and dusty environments to prevent sand and dust from ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC62133 Two-channel Battery Crush and Nail Penetration Test Chamber Complied Standards & Clauses Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a), IEC62133-2012, etc. Product Overview This testing machine simulates the different conditions that may occur when the battery is subjected to extrusions during the use of ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

Multi-position Mobile Manual Release Socket Mechanical Strength Test Device Complied Standards & Clauses Conforms to IEC62196-1:2022. Product Overview Samples and restrictions: Charging gun cable assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

UN 38.3 Sine Shock Control Vibration 51mm Test System 5～3500Hz Complied Standards & Clauses This vibration system is required by UN 38.3 clause 4.3 test T.3, IEC 62133-1:2017 clause 7.2.2, IEC 62133-2:2017 clause 7.3.8.1, etc. Product Overview Vibration testing is the act of exciting or shocking a component or device to see how it would react in a real environment. The application range of ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

Commercial Vehicle Rain Test Chamber Water Spray Booth for Bus Passenger Car Complied Standards & Clauses QC/T 476-2007 "Limits and test methods for rainproof sealing of passenger cars"; GB 29753-2013 "Safety requirements and test methods for refrigerated trucks for road transport of food and biological products"; Product Overview The purpose of this test is to evaluate the ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 68-2-2 Thermal Shock Test Chamber with Water Cooling Chiller 200℃ Complied Standards & Clauses IEC 68-2-1 Basic environmental testing procedures for electric and electronic products Tests A: Cold IEC 68-2-2 Basic environmental testing procedures for electric and electronic products Tests B: Dry heat IEC 60068-2-14:2009, Environmental testing Part 2-14: Tests-Test N: Change of temperature, IDT ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

High and Low Temperature and Humidity Chamber 150L IEC60068-2-78 Complied Standards & Clauses IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-2:2007 ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

Electric vehicle Plug Mechanical Lock Endurance Test Equipment IEC62196-1 Complied Standards & Clauses This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Equipment Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IPX3 IPX4 Water Spray Test Oscillating Tube IP Waterproof Testing Machine Complied Standards & Clauses IPX3~4 oscillating tubes test system is designed and manufactured according to IEC60529:2013. Product Overview It is used for testing the IPX3/IPX4 waterproof level of electrical and electronic products. The complete set of IPX3~4 oscillating tubes test system is composed of one set of oscillatin... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 62196-1 Glow Wire Tester For EV Charging Connector & Insulating Plastic Flammability Test Product Information This glow wire tester is suitable for testing electrical equipment, automotive on-board electrical components, EV conductive charging connection devices (charging guns, charging sockets, charging modules, internal insulating plastic parts of on-board chargers), industrial plugs and ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified

IEC 62196-1 EV Charging Connector Tester, Servo Plug Pull Durability & Breaking Capacity Test Machine Product Overview This high-precision EV charging connector durability test machine is a professional servo-driven laboratory testing solution tailored for new energy vehicle charging interfaces and industrial electrical accessories. Fully compliant with the latest updated international standards ... Sinuo Testing Equipment Co. , Limited Verified Supplierlicense Verified