41 - 50 of 112
testing machine for rotational life test
Selling leads
|
... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation ...
2026-09-08 00:11:14
|
|
...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to ...
2025-04-10 00:31:24
|
|
... cable, earphone cable etc. Cables flexible testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and ...
2026-09-08 00:11:14
|
|
...Testing Machine Model: IC2095 This equipment is designed for testing the swing and bending resistance of multi-core cables, communication cables, ...
2026-04-20 14:04:54
|
|
NBS Rubber Abrasion Testing Machine Volume Measurement ASTM D1630 Model: RS-8200 Purpose: The tester applies for the abrasion volume measurement of ...
2025-04-09 23:31:38
|
|
...curve, torque life time curve, test report), also can memorize all the test conditions. This machine is with high precise load cell and driving by ...
2026-09-08 00:11:14
|
|
...Testing Machine Model Number:IZ1005 Application: It is widely used in friction life testing of oil spray, silk screen printing and other printed ...
2025-04-10 00:29:50
|
|
...Automatic Spindle Test Machine Suitable for Notebook Torsion Test Product model number:IN-F4360 Application: This device is applicable to the HINGE ...
2025-04-10 00:30:52
|
|
... and signal cables. Test methods: make one end of the cable short connected and clamped, fix it on a rotating disk, and then make it rotate ...
2026-09-08 00:11:14
|
|
...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to ...
2025-04-10 00:31:08
|