1 - 10 of 152
easy operation cable bending testing machine
Selling leads
|
...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to ...
2025-04-10 00:31:08
|
|
... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation ...
2026-09-08 00:11:14
|
|
...Cables Cyclic Test Machine Model: C5092 Purpose This automotive cable bending test machine is designed for cyclic bending testing of multi-wire ...
2026-04-11 07:30:12
|
|
... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending ...
2026-09-08 00:11:14
|
|
... Robots — Part 2: Test Methods. Application Cable torsion testing machine is suitable for the torsion test of multi-core cables and communication ...
2026-05-29 07:30:18
|
|
... and signal cables. Test methods: make one end of the cable short connected and clamped, fix it on a rotating disk, and then make it rotate ...
2026-09-08 00:11:14
|
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the ...
2025-04-10 00:31:22
|
|
...Cable Cycle Tester Cables Conductor Cyclic Bending Test Machine IS0 19642-2:2023(E) SFF 8417 Multi-core Cable Bending Cycle Testing Machine Test ...
2025-07-12 00:14:12
|
|
...Cable Cyclic Bending Test Machine IS0 19642-2:2023(E) SFF 8417 Multi-core Cable Bending Cycle Testing Machine Model:C5092 Purpose: Cable bending ...
2025-07-12 00:14:12
|
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the ...
2025-04-10 00:31:38
|