21 - 30 of 166
automotive cable bending tester
Selling leads
|
... Robots — Part 2: Test Methods. Application Cable torsion testing machine is suitable for the torsion test of multi-core cables and communication ...
2026-05-29 07:30:18
|
|
... bending test, observe the material damage, record the bending times while broke. Standard: CNS-7705,JIS-K6545,BS-3144 Specification: Model RS-8232 ...
2025-04-09 23:31:45
|
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the ...
2025-04-10 00:31:22
|
|
...Cable Bending Cycle Testing Machine for Multi-wires Cable Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of ...
2025-04-10 00:32:34
|
|
...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to ...
2025-04-10 00:31:24
|
|
...Cable Bending Cycle Fatigue Testing Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires ...
2025-04-10 00:32:08
|
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the ...
2025-04-10 00:32:16
|
|
... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the ...
2026-04-10 09:49:14
|
|
... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation ...
2026-09-08 00:11:14
|
|
... and signal cables. Test methods: make one end of the cable short connected and clamped, fix it on a rotating disk, and then make it rotate ...
2026-09-08 00:11:14
|