Servo Control Electronic Product Tester

Servo Control Testing Machine For Various Connectors For Insertion Force and Pull-Out Force Test

Model:I6200

Application:

The machine is used in the insertion and extraction force tests of various kinds of connectors. Equipped with an automatic axopetal device and the special fixture for all kinds of connectors, it can ensure accurate insertion and extraction force results. The machine adopts the Windows program, which is easy to operate and can automatically store test data (such as load-stroke curve, load life die-away curve and test results) and all test conditions. The machine also adopts high-precision load cell measurement and servo motor drive, which ensures accurate insertion and extraction force results, making it an essential detecting instrument in the development and research and quality inspection of connector manufacturers and finished products manufacturers.

Feature:

1.The tester only needs to input and store the test conditions of the test piece of a certain batch and the machine will conduct the compression and tensile tests automatically;

2.With different fixtures, it can be used in various connector tests, such as the tensile and compression tests and the endurance and dynaic inpedance tests of R & D and IQC finished connectors. After the test, it can automatically store the test curves and data;

3.English, traditional Chinese and simplified Chinese are available , which shows good applicability.

The test data (curves and data) can be stored in the computer hard disc (the data for every test can be stored in it, without no limitation on the times).

4.The head of the report can be modified (both in English and Chinese) at any time. The report can be generated automatically. The machine can print data and curve reports without your inputting them again.

5.You may input upper and lower limit specification values of the compression or tensile load, and the machine can automatically judge whether the test results pass or fail and analyze the results.

6.It can automatically generate tensile and compression curves. The insertion is positive value, while extraction, negative value.

Specification: